A practical American home plan offered through four complete dry-in package systems after plan and project review. Each plan can be reviewed for reasonable layout changes. Dry-in system availability is confirmed after plan, engineering, roof, and project-location review.
Five exterior viewsSame house · Coastal · Mountain · Snow · Desert
Why the wall system matters
Protection and performance start inside the wall.
Compare the complete wall assembly—not one material in isolation—then add the project-specific services your job actually requires.
01
REZ Wood protection
Treated to help resist mold, rot & termites.
Choose REZ Wood instead of typical lumber for treatment designed to help protect framing from mold growth, termite damage, and wood-decay conditions. The exact treatment, handling requirements, warranty, and availability are identified in the reviewed quote.
MoldRotTermites
Optional upgrade: Fire-retardant-treated lumber can be quoted where supported by the final design, local requirements, and supplier documentation.
Put simply, the June 2026 assessment says a conventional wall would need roughly R-42 to R-43 in wood framing or R-49 to R-50 in steel framing to compare with the modeled Thermatech system.
Compared with wood framingR-42 to R-43
Compared with steel framingR-49 to R-50
*Comparative modeled performance: The assessment modeled the 5.5-inch Thermatech configurations themselves at approximately R-20.5 to R-21.1. The higher numbers are conventional-wall performance equivalents, not directly tested Thermatech insulation ratings, and include the report's assumed air-leakage improvement.
Engineering and signed or sealed drawings are not included in the displayed starting price unless the reviewed quote specifically lists them. When required, they are an additional project-specific cost based on the final plan, project state, design criteria, and local review.
Every configuration includes the coordinated dry-in materials. Choose the wall-framing preparation that fits your crew, timeline, and jobsite.
01Dry-in package · field-cut framingUncut Lumber BunksFull-length lumber plus coordinated dry-in materials. Your crew measures, cuts, and assembles the walls onsite.Available inREZ WoodMold, rot & wood-boring pest resistanceTypical lumberConventional framing lumberSee what's included+
Choose uncut REZ Wood or typical lumber. Buffalo River organizes the plan-based framing into job-ready bunks while your crew handles measuring, field cutting, and assembly. The coordinated dry-in materials come with either lumber choice.
Full-length exterior and interior wall framing in REZ Wood or typical lumber
Organized plan-based material bunks
Windows
Exterior doors
Siding supplied for field cutting onsite
Roofing supplied for field cutting onsite
Radiant-barrier roof sheathing
Engineered trusses or reviewed conventional roof-framing lumber bunks
Weather-resistive barrier where required by the selected wall assembly
Fascia
Soffit
Exterior trim
Beams and columns where required by the plan and engineering
Available plan and print package
Best for: Experienced framers who want a complete dry-in material scope with maximum field flexibility.
02Dry-in package · precut framingPrecut Wall ComponentsJob-specific framing pieces, cut, labeled, and grouped for onsite assembly, plus coordinated dry-in materials.Available inREZ WoodMold, rot & wood-boring pest resistanceTypical lumberConventional framing lumberSee what's included+
Choose precut wall components in REZ Wood or typical lumber. The wall takeoff becomes a programmed cutting package, reducing repetitive measuring, cutting, and sorting at the jobsite. The coordinated dry-in materials come with either lumber choice.
Precut and labeled exterior and interior wall components in REZ Wood or typical lumber
Wall-by-wall material groups
Windows
Exterior doors
Siding supplied for field cutting onsite
Roofing supplied for field cutting onsite
Radiant-barrier roof sheathing
Engineered trusses or reviewed conventional roof-framing lumber bunks
Weather-resistive barrier where required by the selected wall assembly
Fascia
Soffit
Exterior trim
Beams and columns where required by the plan and engineering
Available plan and print package
Best for: Crews that want a complete dry-in package with less jobsite cutting and faster wall assembly.
03Dry-in package · preframed wallsPreframed WallsExterior wall sections assembled before delivery and ready to stand, plus coordinated dry-in materials.Available inREZ WoodMold, rot & wood-boring pest resistanceTypical lumberConventional framing lumberSee what's included+
Choose preframed walls in REZ Wood or typical lumber. Buffalo River assembles the exterior walls with planned openings before delivery. Select full-length lumber bunks or preframed walls for the interior, with the same coordinated dry-in scope.
Factory-assembled exterior wall sections in REZ Wood or typical lumber
Choice of interior lumber bunks or preframed interior walls
Planned openings for the included windows and doors
Windows
Exterior doors
Siding supplied for field cutting onsite
Roofing supplied for field cutting onsite
Radiant-barrier roof sheathing
Engineered trusses or reviewed conventional roof-framing lumber bunks
Weather-resistive barrier where required by the selected wall assembly
Fascia
Soffit
Exterior trim
Beams and columns where required by the plan and engineering
Available plan and print package
Best for: Projects that want a complete dry-in package with fewer wall-framing hours in the field.
04Dry-in package · insulated panelsThermatech Exterior WallsPreinsulated Thermatech exterior walls plus coordinated dry-in materials, with your choice of interior framing.Exterior walls onlyThermatech insulated panelsInterior framing optionsLumber bunks or preframed wallsSee what's included+
Thermatech panels are for the exterior walls. The package combines exterior framing and insulation before delivery, plus all coordinated dry-in materials. For the interior, choose full-length lumber bunks or preframed walls in REZ Wood or typical lumber.
High-efficiency note: A June 2026 third-party thermal model says a conventional wall would need roughly R-42 to R-43 in wood framing or R-49 to R-50 in steel framing to compare with the modeled Thermatech system. The Thermatech assemblies themselves modeled at approximately R-20.5 to R-21.1; the higher numbers are comparative equivalents that include assumed air-leakage improvement, not directly tested Thermatech insulation ratings.
What's included
Preinsulated Thermatech exterior wall panels only
Interior framing options: lumber bunks or preframed walls in REZ Wood or typical lumber
Precut exterior window and door openings
Windows
Exterior doors
Siding supplied for field cutting onsite
Roofing supplied for field cutting onsite
Radiant-barrier roof sheathing
Engineered trusses or reviewed conventional roof-framing lumber bunks
Weather-resistive barrier where required by the selected wall assembly
Fascia
Soffit
Exterior trim
Beams and columns where required by the plan and engineering
Available plan and print package
Best for: Projects prioritizing a complete dry-in shell and factory-controlled exterior insulation work.
Make it yours
Select the system, materials, services, and project location.
Your downloadable brochure will bring the house image, available plan material, standard dry-in scope, selections, location, and takeoff pricing status into one clear project brief.
